EdgeHalt® Ladder Safety Gates
EdgeHalt® Adjustable Safety Gate
EdgeHalt® Ladder Safety Gate
EdgeHalt® Paired Ladder Safety Gate
EdgeHalt® Full Height Ladder Safety Gate
Fits Openings // Part Number:
18”-36” // ASG-1836-PCY
Fits Openings // Part Number:
13-3/4” to 17-1/2” // LSG-15
16-3/4” to 20-1/2” // LSG-18
19-3/4” to 23-1/2” // LSG-21
22-3/4” to 26-1/2” // LSG-24
25-3/4” to 29-1/2” // LSG-27
28-3/4” to 32-1/2” // LSG-30
31-3/4” to 35-1/2” // LSG-33
34-3/4” to 38-1/2” // LSG-36
38-3/4” to 42-1/2” // LSG-40
42-3/4” to 46-1/2” // LSG-44
46-3/4” to 50-1/2” // LSG-48
Fits Openings // Part Number:
18” to 22-1/2“ // LSGDBL-9
22” to 28-1/2“ // LSGDBL-12
28” to 34-1/2“ // LSGDBL-15
34” to 40-1/2“ // LSGDBL-18
40” to 46-1/2“ // LSGDBL-21
46” to 52-1/2“ // LSGDBL-24
Fits Openings // Part Number:
16-3/4” to 20-1/2” // LSGF-18
19-3/4” to 23-1/2” // LSGF-21
22-3/4” to 26-1/2” // LSGF-24
25-3/4” to 29-1/2” // LSGF-27
28-3/4” to 32-1/2” // LSGF-30
31-3/4” to 35-1/2” // LSGF-33
34-3/4” to 38-1/2” // LSGF-36
Available Finishes:
Mild steel, safety yellow powder coat.
Available Finishes:
Powder Coat Yellow (PCY), Hot-Dipped Galvanized (GAL), Stainless Steel (SS), Stainless Steel Seal Welded (SS-SW), or Aluminum (ALU)*.
Available Finishes:
Powder Coat Yellow (PCY), Hot-Dipped Galvanized (GAL), or Stainless Steel (SS).
Available Finishes:
Powder Coat Yellow (PCY), Hot-Dipped Galvanized (GAL), or Stainless Steel (SS).
Installation:
Ships fully assembled, no sawing or cutting required.
Installation:
Ships fully assembled, including standard mounting hardware for round pipe (up to 2" O.D.) or square tubing (up to 1.5" x 1.5" O.D.). Gates can also be match-drilled directly to existing wall or railing system.
Installation:
Ships fully assembled, including standard mounting hardware for round pipe (up to 2" O.D.) or square tubing (up to 1.5" x 1.5" O.D.). Gates can also be match-drilled directly to existing wall or railing system.
Installation:
Ships fully assembled, including standard mounting hardware for round pipe (up to 2" O.D.) or square tubing (up to 1.5" x 1.5" O.D.). Gates can also be match-drilled directly to existing wall or railing system.
Safety Standards:
CE marked, meets OSHA, ANSI, Canada OHS and CSA guardrail standards.
Safety Standards:
Engineered to comply with ladder safety gate requirements in OSHA 1910.28 and 1910.29, as well as ANSI A1264.1-2007 and A14.3-2008.
Safety Standards:
Engineered to comply with ladder safety gate requirements in OSHA 1910.28 and 1910.29, as well as ANSI A1264.1-2007 and A14.3-2008.
Safety Standards:
Engineered to comply with the ladder safety gate requirements in OSHA 1910.28 and 1910.29, as well as ANSI A1264.1-2007, A14.3-2008 and MH28.3-2009.
Options:
Standard railing mount or flat surface mount
Options:
Optional 'no-drill' adapter brackets available if mounting to non-standard railing system. Optional Stand-Off Mounting System available to create increased landing space for employees to transition through ladder.
Options:
Optional Stand-Off Mounting System available to create increased landing space for employees to transition through ladder.
Options
Optional 'no-drill' adapter brackets available if mounting to non-standard railing system. Optional Stand-Off Mounting System available to create increased landing space for employees to transition through ladder.
*Aluminum finish fits openings 16-3/4 to 38-1/2”
EdgeHalt® Adjustable Safety Gate
Fits Openings // Part Number:
18”-36” // ASG-1836-PCY
Available Finishes:
Mild steel, safety yellow powder coat.
Installation:
Ships fully assembled, no sawing or cutting required.
Safety Standards:
CE marked, meets OSHA, ANSI, Canada OHS and CSA guardrail standards.
Options:
Standard railing mount or flat surface mount
EdgeHalt® Ladder Safety Gate
Fits Openings // Part Number:
13-3/4” to 17-1/2” // LSG-15
16-3/4” to 20-1/2” // LSG-18
19-3/4” to 23-1/2” // LSG-21
22-3/4” to 26-1/2” // LSG-24
25-3/4” to 29-1/2” // LSG-27
28-3/4” to 32-1/2” // LSG-30
31-3/4” to 35-1/2” // LSG-33
34-3/4” to 38-1/2” // LSG-36
38-3/4” to 42-1/2” // LSG-40
42-3/4” to 46-1/2” // LSG-44
46-3/4” to 50-1/2” // LSG-48
Available Finishes:
Powder Coat Yellow (PCY), Hot-Dipped Galvanized (GAL), Stainless Steel (SS), Stainless Steel Seal Welded (SS-SW), or Aluminum (ALU)*.
Installation:
Ships fully assembled, including standard mounting hardware for round pipe (up to 2" O.D.) or square tubing (up to 1.5" x 1.5" O.D.). Gates can also be match-drilled directly to existing wall or railing system.
Safety Standards:
Engineered to comply with ladder safety gate requirements in OSHA 1910.28 and 1910.29, as well as ANSI A1264.1-2007 and A14.3-2008.
Options:
Optional 'no-drill' adapter brackets available if mounting to non-standard railing system. Optional Stand-Off Mounting System available to create increased landing space for employees to transition through ladder.
*Aluminum finish fits openings 16-3/4 to 38-1/2”
EdgeHalt® Paired Ladder Safety Gate
Fits Openings // Part Number:
18” to 22-1/2“ // LSGDBL-9
22” to 28-1/2“ // LSGDBL-12
28” to 34-1/2“ // LSGDBL-15
34” to 40-1/2“ // LSGDBL-18
40” to 46-1/2“ // LSGDBL-21
46” to 52-1/2“ // LSGDBL-24
Available Finishes:
Powder Coat Yellow (PCY), Hot-Dipped Galvanized (GAL), or Stainless Steel (SS).
Installation:
Ships fully assembled, including standard mounting hardware for round pipe (up to 2" O.D.) or square tubing (up to 1.5" x 1.5" O.D.). Gates can also be match-drilled directly to existing wall or railing system.
Safety Standards:
Engineered to comply with ladder safety gate requirements in OSHA 1910.28 and 1910.29, as well as ANSI A1264.1-2007 and A14.3-2008.
Options:
Optional Stand-Off Mounting System available to create increased landing space for employees to transition through ladder.
EdgeHalt® Full Height Ladder Safety Gate
Fits Openings // Part Number:
16-3/4” to 20-1/2” // LSGF-18
19-3/4” to 23-1/2” // LSGF-21
22-3/4” to 26-1/2” // LSGF-24
25-3/4” to 29-1/2” // LSGF-27
28-3/4” to 32-1/2” // LSGF-30
31-3/4” to 35-1/2” // LSGF-33
34-3/4” to 38-1/2” // LSGF-36
Available Finishes:
Powder Coat Yellow (PCY), Hot-Dipped Galvanized (GAL), or Stainless Steel (SS).
Installation:
Ships fully assembled, including standard mounting hardware for round pipe (up to 2" O.D.) or square tubing (up to 1.5" x 1.5" O.D.). Gates can also be match-drilled directly to existing wall or railing system.
Safety Standards:
Engineered to comply with the ladder safety gate requirements in OSHA 1910.28 and 1910.29, as well as ANSI A1264.1-2007, A14.3-2008 and MH28.3-2009.
Options
Optional 'no-drill' adapter brackets available if mounting to non-standard railing system. Optional Stand-Off Mounting System available to create increased landing space for employees to transition through ladder.