EdgeHalt® Full Height Ladder Safety Gate
LSGF
The EdgeHalt® Full Height Ladder Safety Gate is an OSHA- and ANSI-compliant swing gate system that reduces the chance of falls on elevated platforms, mezzanines and ladderways. Similar to our EdgeHalt Ladder Safety Gate, this full-height version is self-closing to ensure that protection is in place when it is needed most. The EdgeHalt Full Height Ladder Safety Gate provides a 42″ top rail, mid-rail and 5″ safety toeboard for increased personnel protection.
Available in three finishes: Powder Coat Yellow (PCY), Hot Dipped Galvanized (GAL) and 304 Stainless Steel (SS).
Engineered and tested to comply with the ladder safety gate requirements in OSHA 1910.28 and 1910.29, as well as ANSI A1264.1-2007, A14.3-2008 and MH28.3-2009
An optional Lock-Out Kit is the perfect accessory for the Full Height Ladder Safety Gate. This kit allows for additional security to prevent unauthorized access to restricted areas, elevated platforms or mezzanines by locking the gate so that no one can pass through.
*Ships in 3 days or less; limited to stock on hand
To download specifications and product information, see the black tabs located in the upper right corner (desktop) or bottom (mobile) of your screen.
EDGEHALT FULL HEIGHT LADDER SAFETY GATE QUICK FACTS
EDGEHALT FULL HEIGHT LADDER SAFETY GATE BENEFITS
- Ships fully assembled – Designed to fit any existing railing system – standard pipe, angle iron, flat bar or even an existing wall.
- Self-closing and always in place.
- Simple installation – Installs in minutes with a ratchet and a 1/2″ deep well socket. If mounting to angle iron, flat bar or nonstandard railing, gate bolts directly to railing (hardware not included) or by purchasing and using a no-drill adapter bracket kit. Call PS Safety Access™ for details.
- Additional Security – An optional Lock-Out Kit is the perfect accessory for the Full Height Ladder Safety Gate. This kit allows for additional security to prevent unauthorized access by locking the gate so that no one can pass through.
Frequently Asked Questions
Yes, our EdgeHalt Ladder Safety Gates are self-closing and always in place. Our product utilizes durable, stainless steel torsion springs to close.
No, adapter brackets are optional. EdgeHalt Ladder Safety Gates ship fully assembled, including standard mounting hardware for round pipe (up to 2″ O.D.) and square tubing (up to 1.5″ x 1.5″ O.D.). If mounting to angle iron, flat bar or nonstandard railing, gate bolts directly to railing/wall (hardware not included) or by purchasing and using a no-drill adapter bracket kit.
EdgeHalt Ladder Safety Gates are typically in stock and ship in 1-2 business days. Allow additional lead time for gates ordered in quantities of 8 or more. Please contact PS Safety Access for exact lead time.
Engineered to comply with the ladder safety gate requirements in OSHA 1910.28 and 1910.29, as well as ANSI A1264.1-2007, A14.3-2008 and MH28.3-2009.
Order Request
If you’d like more information about how to order this product, please give us a call at the number below or use our Information Request online form.
877-446-1519
We are here five days a week from 8am-5pm.
Information Request